Follow the steps below to activate the Oracode Smart Controller using the BeHome247 platform:
1. Log into vr.behome247.com with your username and password.
2. Go to Properties and search for the property name where you're installing the Smart Controller.
3. Once inside the property page, click on Settings under the property status icons and enter the Smart Controller’s serial number in the field labeled Gateway Number in the BeHome247 Automation section. Click Save.
5. In the KABA Lock System section, enter the door’s name in the field labeled Door name, place a checkmark in the This property uses wireless I-locks box, and click Save.
6. Check the Show advanced controls box, and click Join under Zigbee-powered locks.
Note: Once this is done, the Smart Controller will be in ZigBee Join mode for 10 mins, and the ZigBee LED light on the Smart Controller will be blinking.
7. On the lock keypad, press * # * # and enter the 8-digit Activation Code to start the activation process.
8. The lock’s green LED light will blink once at the beginning of the activation process.
Note: Please keep in mind that the activation process could last anywhere from a few seconds to 2 minutes.
A green LED light and a high-pitched beep indicate a successful connection to the Oracode Server. A series of silent green LED blinks will follow. This is the lock programming being received from the Oracode Server. The lock programming is complete once there are no more silent green LED blinks. You can now access the lock from the BeHome247 website.
Note: Failure to activate is indicated by a red LED light and a low-pitched beep at the end of the activation process. Please contact Kaba Lodging for customer service assistance.